Welcome to EasyVent, manufacturers of the most innovative and inexpensive loft ventilation system.
EasyVent is fitted in moments without the need for expensive scaffolding or roofing tiles, and supplies enough ventilation to counter the most difficult loft condensation problems.
We service the requirements of Housing Associations and Local Authorities throughout the UK, as well as supplying a national network of builders, roofers and local installers.
Used in conjunction with EasyVortex, this is the total one-stop solution to condensation in domestic properties.
Installation
Step 1
Calculate how many EasyVents are needed (one EasyVent for every five square metres of ceiling area)
Step 2
Before you fit EasyVents, decide where you will gain maximum cross ventilation,. Mark the chosen areas with chalk and separate the overlaying felt (this is easily done by inserting your fingers between the felt). Always wear protective clothing i.e. gloves and a breathing respirator when carrying out this operation.
Step 3
Remove the EasyVent from the packaging and insert the compression spring into the location slot, this is found between the inner surfaces of the vent. Holding the EasyVent in both hands, compress the vent and insert between the two surfaces of the felt, and then release.